SCP Science XRF Automatic Press
The Auto and Power Hydraulic Presses are power assisted hydraulic systems that apply up to 25 tons of pressure
Adoption of a Xenon flash lamp
By adopting a long-lasting Xenon flash lamp, the product delivers a long life for its lamp, eliminating the need for periodic lamp replacement that was necessary in previous model*1.
Energy saving design
Through control of the Xenon flash lamp that emits pulses only during measurement, power consumption is reduced by 70% compared with previous model.
Reduced measurement time
The automatic switching of 6 cells by using an automatic 6-cell turret and a high-speed scanning (12,000 nm/min) deliver a substantial reduction in measurement time (approximately 60% reduction). The examples shown in the figure compare*2 the amount of time required to measure 100 samples (5 wavelengths × 20 samples) with a previous model*1, based on biological analyses and quality control on food products.
Compact, lightweight design
The U-5100 features a 38% smaller footprint, and a 52% reduction in weight compared with a previous model*1, which makes it easier to secure an adequate installation space.
The standard configuration of an automatic 6-cell turret makes performing measurements a breeze. As part of its standard configuration, the system is equipped with a 6-cell turret which accommodates up to six 10-mm rectangular cells.
The system can measure a maximum of six calibration solutions and sample solutions*3, which reduces measurement time.
Specification
| Item | Description |
|---|---|
| Optics | Seya-Namioka mount monochromator, ratio beam |
| Wavelength range | 190 to 1,100 nm |
| Spectral bandpass | 5 nm |
| Light source | Xenon(Xe) flash lamp |
| Display | LED with backlight 120 mm × 90 m, 320dot × 240dot |
| Cell | 6 cell turret(Automatic) (Single cell holder is optional) |
| Size (main unit) | 355 (W) × 425 (D) × 235 (H) mm |
| Weight (main unit) | 13 kg |
| Power supply/ Power consumption |
100, 115, 220, 230 or 240 V, 50/60 Hz 60 VA |
The Auto and Power Hydraulic Presses are power assisted hydraulic systems that apply up to 25 tons of pressure
The SEMCool is based on the PP3006 CoolLok but without the PP3004 QuickLok components. It is designed for cryogenic applications where airlock exchange of specimens into the microscope is not required.
Several improvements and enhancements have been made to the latest HORIBA LAQUA handheld meters allowing sustained periods of operations in challenging outdoor conditions and making the 200 series a compact yet powerful versatile water quality meters.
The VIDAÂ Density Meter is a simple solution for measuring density in refining and petrochemical applications. VIDAÂ comes in two models…
Our LAQUA benchtop models were developed to provide simplicity with excellent on-site usability – from operation and maintenance through to troubleshooting.
The high pressure viscosity sensors 440 and 443 are used in various applications including PVT oil research, EOR, core analysis, and supercritical fluid research.
You may contact our specialists by accomplishing form below.
You may contact our specialists by accomplishing form below.