Inquire
quality vision international

Contour Projectors

Optical Comparators

Category: Failure Analysis, Material Characterization and Metrology

COMPLETE LINE OF OPTICAL COMPARATORS WITH THE WORLD’S MOST ADVANCED MEASUREMENT TECHNOLOGIES

The mainstay of shop-floor measurement, optical comparators’ tough construction and big viewing screens make measurements fast and easy. Contour Projectors® Horizontal Optical Comparators from OGP offer the industry’s best value and performance for non-contact measurement. All OGP benchtop and floor model comparators use cutting-edge optical, lighting, and automation technologies, allowing for tight tolerances and a wide range of manufacturing process applications.

Request Quote
QVI OGP Contour Projectors

CONTOUR PROJECTOR MODEL COMPARISON
Features Focus QL-20 QL-30
Screen Size (viewable) 14″ 20″ 30″
XY Travel
Standard 12” x 5” 15” x 9”
Optional 15” x 5” 15 x 10”, 18” x 9”, or 18” x 10”
Z Focus Travel 1.5” (1.25” with optional oblique ringlight) 3”
XY Drive
Manual x – –
Motorized * x x
Optics Telecentric, upright and reversed Telecentric, upright and un-reversed
Optical Lens
Turret Lens Standard 3-position turret Standard Fixed 1-position turret, Optional Motorized 5-position turret
Standard 10x Lens
Optional 20x, 31.25x, 50x, 100x 20x, 31.25x, 50x, 62.5x, 100x
Maximum Load Capacity 45 lb 350 lb
Helix Angle Range
Standard +/- 6.5 degrees – –
Optional – +/- 7.5 degrees +/- 7.5 degrees
Throat Clearance 10” (9” with optional oblique ringlight) 19” 21”
Illumination
Profile x x x
Oblique * – –
Coaxial * * *
Illumination Type LED LED Mercury Arc
Projectron Edge Detection * * *
eCAD® – * *
VidiProbe * * *
DRO
Q-Check® x x x
Q-Touch™ * * *
Software
SNAP-X™ Measure ** ** **
SNAP-X™ Compare ** ** **
SNAP-X™ Analyze *** *** ***
eChek™ * * *
OGP EVOLVE® SPC * * *
x– Standard ; * – Optional; ** – Included with VidiProbe; *** – Optional with VidiProbe

 

Contour Projectors full features

More OGP products

Other Products

Ultra Tec ASAP-1® IN SITU 5-Axis CNC Mill

Ultra Tec ASAP-1® IN SITU 5-Axis CNC Mill

Based on many years of customer input and product development, ASAP-1® IN SITU is a single-footprint milling and sample prep system that can incorporate RST Measurement System –allowing measurement of the thickness of remaining silicon without sample transfer.

Learn More ➤
LI-COR LI-210R Photometric Sensor

LI-COR LI-210R Photometric Sensor

The LI-210R Photometric Sensor measures light with the same sensitivity as a typical human eye. The photometric sensor is ideal for evaluating illumination in work areas, exhibits, interior lighting, and in public spaces. Measurement units are lux or klux.

Learn More ➤
AC PAC Crude Oil Analyzer

AC PAC Crude Oil Analyzer

The Crude Oil Analyzer combines the results of DHA Front End (FE) and High Temp (HT) SIMDIS analyses into one total true boiling point (TBP) report for the best performance in crude oil analysis.

Learn More ➤
All Products

HOW CAN WE HELP?

You may contact our specialists by accomplishing form below.

Request Quote

You may contact our specialists by accomplishing form below.