Data Logger

Water Level Data Logger

A low-cost, research-grade data logger for continuous monitoring of water level and temperature at depths of up to 13, 30, or 100 feet in a wide range of underwater environments; for use in freshwater or saltwater.

HOBO Water Level Data Logger

Overview

A low-cost, research-grade data logger for continuous monitoring of water level and temperature at depths of up to 13, 30, or 100 feet in a wide range of underwater environments. This logger features 0.1% measurement accuracy, a polypropylene housing for use in both freshwater and saltwater, and a non-vented design for convenient and hassle-free deployment.

U20L optical interface illustration

HOBO Water Level Data Logger

Features
  • Self-contained, non-vented design enables easy deployment
  • Ideal for use in both freshwater and saltwater environments, including wells, streams, lakes, wetlands, and tidal areas
  • Depths up to 13, 30, or 100 feet depending on model
  • Durable ceramic pressure sensor withstands freezing
  • HOBOware Pro software provides easy conversion to accurate water level reading, fully compensated for barometric pressure, temperature, and water density

Note: A calibration certificate is not offered for this logger. If you require a NIST-traceable calibration certificate, please see the U20-001-01 (freshwater)or U20-001-01-Ti (saltwater).

HOBO Water Level Data Logger

Specifications

Pressure (Absolute) and Water Level Measurements U20L-01

Operation Range

0 to 207 kPa (0 to 30 psia); approximately 0 to 9 m (0 to 30 ft) of water depth at sea level, or 0 to 12 m (0 to 40 ft) of water at 3,000 m (10,000 ft) of altitude

Factory Calibrated Range

69 to 207 kPa, 0° to 40°C
10 to 30 psia, 32° to 104°F

Burst Pressure

310 kPa or 18 m depth
45 psia or 60 ft depth

Water Level Accuracy*

Typical error: ±0.1% FS, 1.0 cm (0.03 ft) water
Maximum error: ±0.2% FS, 2.0 cm (0.06 ft) water

Raw Pressure Accuracy**

±0.3% FS, 0.62 kPa (0.09 psi) maximum error

Resolution

<0.02 kPa water
0.007 ft water

Pressure Response Time (90%)***

<1 second at a stable temperature; measurement accuracy also depends on temperature response time

HOBO Water Level Data Logger

Pressure (Absolute) and Water Level Measurements U20L-02

Operation Range

0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at 3,000 m (10,000 ft) of altitude

Factory Calibrated Range

69 to 400 kPa (10 to 58 psia), 0° to 40°C (32° to 104°F)

Burst Pressure

500 kPa (72.5 psia) or 40.8 m (134 ft) depth

Water Level Accuracy*

Typical error: ±0.1% FS, 3.0 cm (0.1 ft) water
Maximum error: ±0.2% FS, 6.0 cm (0.2 ft) water

Raw Pressure Accuracy**

±0.3% FS, 1.20 kPa (0.17 psi) maximum error

Resolution

<0.04 kPa (0.006 psi), 0.41 cm (0.013 ft) water

Pressure Response Time (90%)***

<1 second at a stable temperature; measurement accuracy also depends on temperature response time

HOBO Water Level Data Logger

Pressure (Absolute) and Water Level Measurements U20L-04


Operation Range

0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude

Factory Calibrated Range

69 to 145 kPa (10 to 21 psia), 0° to 40°C (32° to 104°F)

Burst Pressure

310 kPa (45 psia) or 18 m (60 ft) depth

Water Level Accuracy*

Typical error: ±0.1% FS, 0.4 cm (0.013 ft) water
Maximum error: ±0.2% FS, 0.8 cm (0.026 ft) water

Raw Pressure Accuracy**

±0.3% FS, 0.43 kPa (0.063 psi) maximum error

Resolution

<0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water

Pressure Response Time (90%)***

<1 second at a stable temperature; measurement accuracy also depends on temperature response time

HOBO Water Level Data Logger

Temperature Measurements (All Models)

Operation Range

-20° to 50°C

-4° to 122°F

Accuracy

±0.44°C from 0° to 50°C , see manual for plot

±0.79°F from 32° to 122°F , see manual for plot

Resolution

0.10°C at 25°C , see manual for plot

0.18°F at 77°F , see manual for plot

Response Time (90%)

10 minutes in water (typical)

Stability (Drift)

0.1°C per year

0.18°F per year

HOBO Water Level Data Logger

Logger

Real-time Clock

±1 minute per month 0° to 50°C (32° to 122°F)

Battery

2/3 AA, 3.6 Volt lithium, factory-replaceable

Battery Life (Typical Use)

5 years with 1 minute or greater logging interval

Memory (Non-volatile)

64K bytes memory (approx. 21,700 pressure and temperature samples)

Weight

Approximately 154 g (5.43 oz) in air

Approximately 53.9 g (1.9 oz) in fresh water

Dimensions

3.18 cm (1.25 inches) diameter, 15.24 cm (6.0 inches) length; mounting hole 6.3 mm (0.25 inches) diameter

Wetted Materials

Polypropylene housing and lanyard; Viton and Buna-N O-rings; ceramic sensor in acetal end cap; stainless steel screws suitable for saltwater

Logging Interval

Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours. Refer to the HOBOware User’s Guide for details.

Launch Modes

Immediate start and delayed start

Offload Modes

Offload while logging; stop and offload

Battery Indication

Battery voltage can be viewed in status screen and optionally logged in datafile. Low battery indication in datafile.

Environmental Rating

IP68

HOBO Water Level Data Logger

For more information, contact us.

Available in
MX Water Level Data Logger

Choose documentation language:

Features

Choose documentation language:

Related Products

Rugged and Bluetooth-enabled, the MX2308 delivers research-grade monitoring of key growing conditions—photosynthetically active radiation (PAR), temperature and relative humidity—all in a single devic
A waterproof temperature logger that uses the power of Bluetooth to deliver high-accuracy data straight to your mobile device or Windows computer running our free HOBOconnect app.
With its narrow range, this logger provides the best accuracy in shallow waters.
A four-channel thermocouple LCD display data logger to measure and record temperature in a broad range of monitoring applications.
A weatherproof data logger with an external soil/water temperature sensor on a 6-foot cable, for applications where just one temperature probe is required. Also includes an internal temperature sensor
The LI-7700 is designed specifically for eddy covariance flux measurements to evaluate methane emissions from the terrestrial landscape.
The LI-210R Photometric Sensor measures light with the same sensitivity as a typical human eye. The photometric sensor is ideal for evaluating illumination in work areas, exhibits, interior, etc.
A stainless-steel 5-inch probe temperature data logger, ideal for monitoring internal temperature of foods or for any application where fast response is critical.
A miniature, value-priced, waterproof data logger for temperature monitoring applications.
A weatherproof data logger with built-in temperature and relative humidity sensors.

How can we help?

You may contact our specialists by accomplishing form below.

failure analysis, material characterization, and metrology equipment

Subscribe to newsletter

Sign up for our newsletter to get updates on promos, seminars, events, products, application notes and more.

Inquire for this Product

Water Level Data Logger
Data Logger
Water Level Data Logger
Data Logger