PAC Herzog HDV 632: Vacuum Distillation

Vacuum Distillation

HDV 632

The HDV 632 is a fully automated Vacuum Distillation Analyzer, which offers highest flexibility for the user. It can measure samples up to 650C AET. Choose ASTM D1160 or define and save your own custom programs. Naturally, you can add, delete, and revise custom tests as your products and test needs evolve. The HDV 632 controls temperature, distillation rate, and pressure with microprocessor precision. Volume measurements are made with digital accuracy, and test program selection is a simple “point and click” operation. Choose from an extensive library of built-in programs or your own predefined tests.

The HDV 632 incorporates everything needed for fully automated distillation testing, yet uses only 0.33 square meters (3.25 sq. ft.) of bench space. In fact, it even features built-in refrigeration systems one for the cold trap plus a heater/cooler for the condenser bath there is no need to run hoses to an external water supply or chiller system.

EASY TO USE

Initiate tests with only a few clicks and keystrokes
Digital Volume Measuring System with automatic calibration
Automatic cleaning sequence runs sufficiently long to clean the column and cool system for next distillation

PRECISION ANALYSIS

Dual transducer sensing system provides accurate, precise pressure measurements over a broad range of distillation pressures
Digital, proportional pressure control eliminates transducer calibration and provides precise pressure regulation

FLEXIBLE

Custom distillation curves record results at additional volume and temperature points or stop testing at a specific volume/temperature point
Stores data internally or exports to LIMS
Enables receiving compartment temperature control at setpoints from +10° to +80°C

PERFORMANCE

Automatic sensor prevents sample from foaming into column during pressure reduction sequence
Automatically calculates required sample weight based on sample density, and adjusts distillation results for weighing errors

Brochure

HDV-632 Brochure

Features

EASY TO USE

Initiate tests with only a few clicks and keystrokes
Digital Volume Measuring System with automatic calibration
Automatic cleaning sequence runs sufficiently long to clean the column and cool system for next distillation

PRECISION ANALYSIS

Dual transducer sensing system provides accurate, precise pressure measurements over a broad range of distillation pressures
Digital, proportional pressure control eliminates transducer calibration and provides precise pressure regulation

FLEXIBLE

Custom distillation curves record results at additional volume and temperature points or stop testing at a specific volume/temperature point
Stores data internally or exports to LIMS
Enables receiving compartment temperature control at setpoints from +10° to +80°C

PERFORMANCE

Automatic sensor prevents sample from foaming into column during pressure reduction sequence
Automatically calculates required sample weight based on sample density, and adjusts distillation results for weighing errors

Downloads

Brochure

HDV-632 Brochure

Micro Carbon Residue Tester

Alcor’s MCRT-160 provides safe measurements of petroleum products with a tendency to thermally degrade and form coke under high temperature pyrolyzing conditions.

Small Scale

The Optiflash accurately detects flashpoint from -30°C up to 300°C for petroleum products, biodiesels, solvents, chemicals, paint varnishes, fluxed bitumen and food and beverages.

Hi-Speed RGA - Refinery Gas Component

PAC’s AC Analytical Controls offers the Hi-Speed Refinery Gas Analyzer, a high speed solution that determines and reports the composition of refinery gas streams in only five minutes.

Ring & Ball Tester

The HRB 754 Ring & Ball; Ball Tester automatically determines the softening point of bitumen, tar, pitch, tall oil rosins, and polymeric resins.

Diesel Thermal Oxidation Tester

Our new DTOT which is suitable for several blends of diesel fuel like Pure Diesel (B0), Diesel Fuel with 7% FAME (B7) and Diesel Fuel with 20% FAME (B20).

Wax Appearance Temperature

The WAT-70Xi is the world’s first and only totally automatic process to measure WAT and WDT of crudes and marine fuel, capable of performing reliable testing of VLSFO and residual black oils.

Cleveland Open Cup

Optiflash Cleveland Open Cup accurately detects flash point up to 400°C for petroleum products, lube oil, gear oil, food & beverages, chemicals, and fluxed bitumen.

The Reformulyzer M4’s short analysis time allows to run up to 100% more samples a day and it enables labs to comply to the significant in-tank and in-ship blending time constraints related to analysis