Quorum K975X Turbo-Pumped Thermal Evaporator - Sigmatech Inc.

Failure Analysis, Material Characterization, Metrology Equipment

Sample Preparation

Turbo-Pumped Thermal Evaporator

K975X

A high vacuum evaporator for TEM, SEM and thin film applications

Key Industries: Batteries, Semiconductor and Electronics and more.

The K975X is a compact, bench-mounted, multiple application
thermal evaporator for vacuum deposition of thin layers of
carbon and metals. It is ideal for a wide range of techniques,
including the manufacture of carbon support films and replicas
for TEM, plus metal and carbon thin film applications.
The K975X is available with a wide range of optional add-ons,
including low-angle shadowing and sequential layer coating
using dual-source evaporation (an additional metal evaporation
source is needed). A sputtering attachment and film thickness
monitor are also available.
The system is fitted with an 80mm diameter flat rotation
specimen stage, but this can be exchanged for optional stages
and holders to meet differing user requirements.
The K975X vacuum system is under fully automatic or manual
control and uses a 100L/s turbomolecular pump to ensure
rapid pump down and clean vacuum conditions.

Features

The K975X is a compact, bench-mounted, multiple application
thermal evaporator for vacuum deposition of thin layers of
carbon and metals. It is ideal for a wide range of techniques,
including the manufacture of carbon support films and replicas
for TEM, plus metal and carbon thin film applications.
The K975X is available with a wide range of optional add-ons,
including low-angle shadowing and sequential layer coating
using dual-source evaporation (an additional metal evaporation
source is needed). A sputtering attachment and film thickness
monitor are also available.
The system is fitted with an 80mm diameter flat rotation
specimen stage, but this can be exchanged for optional stages
and holders to meet differing user requirements.
The K975X vacuum system is under fully automatic or manual
control and uses a 100L/s turbomolecular pump to ensure
rapid pump down and clean vacuum conditions.

Downloads

Related Products

Hitachi HT7800

Transmission Electron Microscope (TEM)

The HT7800 RuliTEM is a 120 kV transmission electron microscope (TEM) with multiple lens configurations, including a standard lens for unsurpassed high contrast and a class-leading HR lens.

IR-2200

Infrared Microscope

IR-2200 Microscope System enables the user to inspect sub-surface images including MEMS device, 3D stacks, incoming wafers, photovoltaic and wafer level CSP’s with an astonishing level of precision.

Wafer Inspection System

Seiwa Wafer review system visually inspects the defect location detected from AOI systems. This review system is able to capture the visual data and add it to previous inspection results.

Scanning Electron Microscope

FlexSEM 1000 II

The FlexSEM 1000 II VP-SEM combines innovative technological features with an intuitive interface, to deliver adaptability and flexibility in a powerful, automated, lab-friendly package.

NEXTA STA Series

Simultaneous Thermogravimetric Analyzer (DSC-TGA)

STA (simultaneous thermogravimetric analysis) measures DSC and TGA simultaneously in a single unit.

K850

Critical Point Dryer

The K850 combines versatility and ease of operation. Built-in thermo-electric heating and adiabatic cooling allow precise temperature control.

SU3800 / SU3900

Scanning Electron Microscope

Hitachi High-Tech’s scanning electron microscopes SU3800/SU3900 deliver both operability and expandability. The operator can automate many operations and efficiently utilize their high performance.

iPHEMOS MPX

Inverted Emission Microscope

The iPHEMOS-MPX is a high-resolution Inverted Emission Microscope that pinpoints failure locations in semiconductor devices by detecting the weak light emissions and heat emissions caused by defects.

NEXTA DSC

Differential Scanning Calorimeter

DSC is used to measure heat flow for material characterization by providing thermal properties such as melting point, glass transition and crystallization.

Ultraslice Macrotome

Precision Diamond Saw

Ultraslice Macrotome is a low-cost sectioning system designed for mobile chips, devices, and various industrial samples. This system is known for its precision and versatility.